View Full Version : Ka-6 Oxygen
Peter von Tresckow
January 3rd 12, 06:01 PM
So I'm thinking about maybe going to the carolina wave camp, but my flatland 
Ka-6Cr isn't equipped with O2. I seem to recall that the round hole in the 
bulkhead on the right side behind the pilot is intended to hold a bottle.
What size bottle is supposed to fit in there?
Thanks
Peter
N4793T
Peter Scholz[_3_]
January 3rd 12, 07:13 PM
Am 03.01.2012 18:01, Peter von Tresckow wrote:
> So I'm thinking about maybe going to the carolina wave camp, but my flatland
> Ka-6Cr isn't equipped with O2. I seem to recall that the round hole in the
> bulkhead on the right side behind the pilot is intended to hold a bottle.
>
> What size bottle is supposed to fit in there?
>
> Thanks
>
> Peter
> N4793T
>
>
It probably was made for a standard 3 Liter steel bottle, diameter is 
100mm, length of the bottle ca. 50 cm (without the valve). This is the 
usual standard in Schleicher planes.
--
Peter Scholz
ASW24 JE
Tim Mara
January 3rd 12, 07:19 PM
most K6's had a tube for mounting oxygen bottles, unfortunately the tube fit 
the european bottles that are just a smidge smaller OD than they typical US 
Bottles and their bottles didn't include a blow out fixture and therefore 
don't pass US DOT standards and cannot be used....so it may require a 
smaller size system to fit but the newer systems utilizing oxysaver cannulas 
and even Aerox DDO2 systems the systems are far more efficient than the old 
system sand duration can be very similar to the older larger 
bottles.....these new systems can be quickly added since they are completely 
portable and don't even require any installation, or paperwork.
please see http://www.wingsandwheels.com/page35.htm for more data
tim
"Peter von Tresckow" > wrote in message 
...
> So I'm thinking about maybe going to the carolina wave camp, but my 
> flatland Ka-6Cr isn't equipped with O2. I seem to recall that the round 
> hole in the bulkhead on the right side behind the pilot is intended to 
> hold a bottle.
>
> What size bottle is supposed to fit in there?
>
> Thanks
>
> Peter
> N4793T
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus 
> signature database 6765 (20120103) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
> 
__________ Information from ESET NOD32 Antivirus, version of virus signature database 6765 (20120103) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
Wayne Paul
January 4th 12, 04:42 AM
Peter,
I had the EDS system coupled to their 11 cu foot "F" Kevlar bottle.  The 
bottle fit the Ka-6E hole once it was rapped with a layer of felt.
http://www.mhoxygen.com/index.php?option=com_content&view=category&layout=blog&id=6&Itemid=66
http://www.mhoxygen.com/index.php?option=com_content&view=category&layout=blog&id=23&Itemid=2
http://www.mhoxygen.com/index.php?option=com_content&view=article&id=54&Itemid=49
Wayne
"Peter von Tresckow"  wrote in message ...
So I'm thinking about maybe going to the carolina wave camp, but my flatland
Ka-6Cr isn't equipped with O2. I seem to recall that the round hole in the
bulkhead on the right side behind the pilot is intended to hold a bottle.
What size bottle is supposed to fit in there?
Thanks
Peter
N4793T
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.